My Community

vasp.4.6.3 06Feb03 complex
POSCAR found : 1 types and 100 ions
LDA part: xc-table for Ceperly-Alder, Vosko type interpolation para-ferro
forrtl: severe (71): integer divide by zero
Image PC Routine Line Source
vasp 00000000004AC175 Unknown Unknown Unknown
vasp 00000000004AB447 Unknown Unknown Unknown
vasp 0000000000421591 Unknown Unknown Unknown
vasp 0000000000415442 Unknown Unknown Unknown
libc.so.6 0000003BFEA1D8B4 Unknown Unknown Unknown
vasp 0000000000415369 Unknown Unknown Unknown

KPOINTS: FEO

Automatic generation of k-mesh.

Subroutine IBZKPT returns following result:
===========================================

Found 1 irreducible k-points:

Following reciprocal coordinates:
Coordinates Weight
0.000000 0.000000 0.000000 1.000000

Following cartesian coordinates:
Coordinates Weight
0.000000 0.000000 0.000000 1.000000

FEO
0
Monkhorst
1 1 1
0 0 0

.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for P4 systems
#
# The makefile was tested only under Linux on Intel platforms
# (Suse 5.3, libc 6 <-> glibc 2.X)
#
# it might be required to change some of library pathes, since
# LINUX installation vary a lot
# Hence check ***ALL**** options in this makefile very carefully
#-----------------------------------------------------------------------
#
# Mind that some Linux distributions (Suse 6.1) have a bug in
# libm causing small errors in the error-function (total energy
# is therefore wrong by about 1meV/atom). The recommended
# solution is to update libc.
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
# retrieve the lapackage from ftp.netlib.org
# and compile the blas routines (BLAS/SRC directory)
# please use g77 or f77 for the compilation. When I tried to
# use pgf77 or pgf90 for BLAS, VASP hang up when calling
# ZHEEV (however this was with lapack 1.1 now I use lapack 2.0)
# 2) most desirable: get an optimized BLAS
# for a list of optimized BLAS try
# http://www.kachinatech.com/~hjjou/scilib/opt_blas.html
#
# the two most reliable packages around are presently:
# 3a) Intels own optimised BLAS (PIII, P4, Itanium)
# http://developer.intel.com/software/products/mkl/
# this is really excellent when you use Intel CPU's
#
# 3b) or obtain the atlas based BLAS routines
# http://math-atlas.sourceforge.net/
# you certainly need atlas on the Athlon, since the mkl
# routines are not optimal on the Athlon.
# If you want to use atlas based BLAS, check the lines around LIB=
#
#-----------------------------------------------------------------------

# all CPP processed fortran files have the extension .f
SUFFIX=.f90

#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=ifort
# fortran linker
FCL=$(FC)


#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
# CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
# CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
# SUSE X.X, maybe some Red Hat distributions:

CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf charge density reduced in X direction
# wNGXhalf gamma point only reduced in X direction
# avoidalloc avoid ALLOCATE if possible
# IFC work around some IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000 P4
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (usually faster)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (faster on P4)
#-----------------------------------------------------------------------

#CPP = $(CPP_) -DHOST=\"LinuxIFC\" \
# -Dkind8 -DNGXhalf -DCACHE_SIZE=8000 -DPGF90 -Davoidalloc \
# -DRPROMU_DGEMV -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# general fortran flags (there must a trailing blank on this line)
#-----------------------------------------------------------------------

FFLAGS = -I/opt/intel/mkl/10.0.3.020/include/fftw -FR -lowercase -assume byterecl

#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -xW SSE2 optimization
# -axW SSE2 optimization, but also generate code executable on all mach.
# -tpp7 P4 optimization
# -prefetch
#-----------------------------------------------------------------------

OFLAG=-O3

OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG = -FR -O0
INLINE = $(OFLAG)


#-----------------------------------------------------------------------
# the following lines specify the position of BLAS and LAPACK
# on P4, VASP works fastest with Intels mkl performance library
# so that's what I recommend
#-----------------------------------------------------------------------

# Atlas based libraries
#ATLASHOME= $(HOME)/archives/BLAS_OPT/ATLAS/lib/Linux_P4SSE2/
#BLAS= -L$(ATLASHOME) -lf77blas -latlas

# use specific libraries (default library path points to other libraries)
#BLAS= $(ATLASHOME)/libf77blas.a $(ATLASHOME)/libatlas.a

# use the mkl Intel libraries for p4 (www.intel.com)
BLAS=-L/opt/intel/mkl/10.0.3.020/lib/em64t -lmkl_intel_lp64 -lmkl_blacs_lp64 -lmkl_intel_thread -lmkl_core -liomp5 -lpthread

# LAPACK, simplest use vasp.4.lib/lapack_double
#LAPACK= ../vasp.4.lib/lapack_double.o

# use atlas optimized part of lapack
#LAPACK= ../vasp.4.lib/lapack_atlas.o -llapack -lcblas

# use the mkl Intel lapack
LAPACK=-L/opt/intel/mkl/10.0.3.020/lib/em64t -lmkl_lapack

#-----------------------------------------------------------------------

#LIB = -L../vasp.4.lib -ldmy \
# ../vasp.4.lib/linpack_double.o $(LAPACK) \
# $(BLAS)

# options for linking (none required)
LINK =

#-----------------------------------------------------------------------
# fft libraries:
# VASP.4.5 can use FFTW (http://www.fftw.org)
# since the FFTW is very slow for radices 2^n the fft3dlib is used
# in these cases
# if you use fftw3d you need to insert -lfftw in the LIB line as well
# please do not send us any querries reltated to FFTW (no support)
# if it fails use fft3dlib
#-----------------------------------------------------------------------

#FFT3D = fft3dfurth.o fft3dlib.o
#FFT3D = fftw3d+furth.o fft3dlib.o


#=======================================================================
# MPI section, uncomment the following lines
#
# one comment for users of mpich or lam:
# You must *not* compile mpi with g77/f77, because f77/g77
# appends *two* underscores to symbols that contain already an
# underscore (i.e. MPI_SEND becomes mpi_send__). The pgf90
# compiler however appends only one underscore.
# Precompiled mpi version will also not work !!!
#
# We found that mpich.1.2.1 and lam-6.5.X are stable
# mpich.1.2.1 was configured with
# ./configure -prefix=/usr/local/mpich_nodvdbg -fc="pgf77 -Mx,119,0x200000" \
# -f90="pgf90 -Mx,119,0x200000" \
# --without-romio --without-mpe -opt=-O \
#
# lam was configured with the line
# ./configure -prefix /usr/local/lam-6.5.X --with-cflags=-O -with-fc=pgf90 \
# --with-f77flags=-O --without-romio
#
# lam was generally faster and we found an average communication
# band with of roughly 160 MBit/s (full duplex)
#
# please note that you might be able to use a lam or mpich version
# compiled with f77/g77, but then you need to add the following
# options: -Msecond_underscore (compilation) and -g77libs (linking)
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi: if you use LAM and compiled it with the options
# suggested above, you can use the following line
#-----------------------------------------------------------------------

FC=/usr/mpi/intel/openmpi-1.2.8-qlc/bin/mpif90
FCL=$(FC)

#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf charge density reduced in Z direction
# wNGZhalf gamma point only reduced in Z direction
# scaLAPACK use scaLAPACK (usually slower on 100 Mbit Net)
#-----------------------------------------------------------------------

CPP = $(CPP_) -DMPI -DHOST=\"LinuxIFC\" -DIFC \
-Dkind8 -DNGZhalf -DCACHE_SIZE=16000 -DPGF90 -Davoidalloc \
# -DRPROMU_DGEMV -DRACCMU_DGEMV -DMPI_BLOCK=8000

#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply uncomment the line SCA
#-----------------------------------------------------------------------

#BLACS=$(HOME)/archives/SCALAPACK/BLACS/
#SCA_=$(HOME)/archives/SCALAPACK/SCALAPACK

#SCA= $(SCA_)/libscalapack.a \
# $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a $(BLACS)/LIB/blacs_MPI-LINUX-0.a $(BLACS)/LIB/blacsF77init_MPI-LINUX-0.a

SCA=

#-----------------------------------------------------------------------
# libraries for mpi
#-----------------------------------------------------------------------

LIB = -L../vasp.4.lib -ldmy \
../vasp.4.lib/linpack_double.o $(LAPACK) \
$(SCA) $(BLAS)

# FFT: only option fftmpi.o with fft3dlib of Juergen Furthmueller

FFT3D = fftmpi.o fftmpi_map.o fft3dlib.o /opt/intel/mkl/10.0.3.020/lib/em64t/libfftw3xf_intel.a

#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC= symmetry.o symlib.o lattlib.o random.o

SOURCE= base.o mpi.o smart_allocate.o xml.o \
constant.o jacobi.o main_mpi.o scala.o \
asa.o lattice.o poscar.o ini.o setex.o radial.o \
pseudo.o mgrid.o mkpoints.o wave.o wave_mpi.o $(BASIC) \
nonl.o nonlr.o dfast.o choleski2.o \
mix.o charge.o xcgrad.o xcspin.o potex1.o potex2.o \
metagga.o constrmag.o pot.o cl_shift.o force.o dos.o elf.o \
tet.o hamil.o steep.o \
chain.o dyna.o relativistic.o LDApU.o sphpro.o paw.o us.o \
ebs.o wavpre.o wavpre_noio.o broyden.o \
dynbr.o rmm-diis.o reader.o writer.o tutor.o xml_writer.o \
brent.o stufak.o fileio.o opergrid.o stepver.o \
dipol.o xclib.o chgloc.o subrot.o optreal.o davidson.o \
edtest.o electron.o shm.o pardens.o paircorrection.o \
optics.o constr_cell_relax.o stm.o finite_diff.o \
elpol.o setlocalpp.o

INC=

vasp: $(SOURCE) $(FFT3D) $(INC) main.o
rm -f vasp
$(FCL) -o vasp $(LINK) main.o $(SOURCE) $(FFT3D) $(LIB)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
$(FCL) -o makeparam $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
$(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
$(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
$(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o base.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
$(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)

clean:
-rm -f *.f *.o *.L ; touch *.F

main.o: main$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcspin$(SUFFIX)

makeparam.o: makeparam$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c makeparam$(SUFFIX)

makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
poscar.o: poscar.inc poscar.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.inc wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F

$(OBJ_HIGH):
$(CPP)
$(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
$(CPP)
$(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)

fft3dlib_f77.o: fft3dlib_f77.F
$(CPP)
$(F77) $(FFLAGS_F77) -c $*$(SUFFIX)

.F.o:
$(CPP)
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
$(CPP)
$(SUFFIX).o:
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)

# special rules
#-----------------------------------------------------------------------

# -tpp5|6|7 P, PII-PIII, PIV
# -xW use SIMD (does not pay of on PII, since fft3d uses double prec)
# all other options do no affect the code performance since -O1 is used

fft3dlib.o : fft3dlib.F
$(CPP)
$(F77) -FR -lowercase -O1 -tpp7 -xW -prefetch- -prev_div -unroll0 -vec_report3 -c $*$(SUFFIX)
fft3dfurth.o : fft3dfurth.F
$(CPP)
$(F77) -FR -lowercase -O1 -c $*$(SUFFIX)

radial.o : radial.F
$(CPP)
$(F77) -FR -lowercase -O1 -c $*$(SUFFIX)

symlib.o : symlib.F
$(CPP)
$(F77) -FR -lowercase -O1 -c $*$(SUFFIX)

symmetry.o : symmetry.F
$(CPP)
$(F77) -FR -lowercase -O1 -c $*$(SUFFIX)

dynbr.o : dynbr.F
$(CPP)
$(F77) -FR -lowercase -O1 -c $*$(SUFFIX)

wave.o : wave.F
$(CPP)
$(F77) -FR -lowercase -O0 -c $*$(SUFFIX)

Hi,

We're sorry that we didn’t answer your question. This does not live up to the quality of support that we aim to provide. The team has since expanded. If we can still help with your problem, please ask again in a new post, linking to this one, and we will answer as quickly as possible.

Best wishes,

VASP