Installing VASP
Posted: Fri Jul 18, 2014 8:01 am
I am trying to install VASP on a AMD Opteron system with
Intel Fortran Compiler 14.4 and MKL libraries with OPENMPI
Linux version is Fedora 20
I get this error :
fpp -f_com=no -free -w0 fftmpiw.F fftmpiw.f90 -DHOST=\"LinuxIFC\" -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf
mpif90 -FR -lowercase -O1 -I/opt/intel/composer_xe_2013_sp1.1.106/mkl/include/fftw -c fftmpiw.f90
ifort: command line remark #10010: option '-lowercase' is deprecated and will be removed in a future release. See '-help deprecated'
fftmpiw.F(439): error #6460: This is not a field name that is defined in the encompassing structure. [NODE_ME]
IF (GRID%COMM%NODE_ME==1) THEN
-----------------------------^
compilation aborted for fftmpiw.f90 (code 1)
make: *** [fftmpiw.o] Error 1
I am using this makefile :
.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron
# based systems
# we recommend this makefile for both Intel as well as AMD systems
# for AMD based systems appropriate BLAS (libgoto) and fftw libraries are
# however mandatory (whereas they are optional for Intel platforms)
# For Athlon we recommend
# ) to link against libgoto (and mkl as a backup for missing routines)
# ) odd enough link in libfftw3xf_intel.a (fftw interface for mkl)
# feedback is greatly appreciated
#
# The makefile was tested only under Linux on Intel and AMD platforms
# the following compiler versions have been tested:
# - ifc.7.1 works stable somewhat slow but reliably
# - ifc.8.1 fails to compile the code properly
# - ifc.9.1 recommended (both for 32 and 64 bit)
# - ifc.10.1 partially recommended (both for 32 and 64 bit)
# tested build 20080312 Package ID: l_fc_p_10.1.015
# the gamma only mpi version can not be compiles
# using ifc.10.1
# - ifc.11.1 partially recommended (some problems with Gamma only and intel fftw)
# Build 20090630 Package ID: l_cprof_p_11.1.046
# - ifort.12.1 strongly recommended (we use this to compile vasp)
# Version 12.1.5.339 Build 20120612
#
# it might be required to change some of library path ways, since
# LINUX installations vary a lot
#
# Hence check ***ALL*** options in this makefile very carefully
#-----------------------------------------------------------------------
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
# retrieve the lapackage from ftp.netlib.org
# and compile the blas routines (BLAS/SRC directory)
# please use g77 or f77 for the compilation. When I tried to
# use pgf77 or pgf90 for BLAS, VASP hang up when calling
# ZHEEV (however this was with lapack 1.1 now I use lapack 2.0)
# 2) more desirable: get an optimized BLAS
#
# the two most reliable packages around are presently:
# 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium)
# http://developer.intel.com/software/products/mkl/
# this is really excellent, if you use Intel CPU's
#
# 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD,
# around 30 GFlops on Quad core)
# Kazushige Goto's BLAS
# http://www.cs.utexas.edu/users/kgoto/signup_first.html
# http://www.tacc.utexas.edu/resources/software/
#
#-----------------------------------------------------------------------
# all CPP processed fortran files have the extension .f90
SUFFIX=.f90
#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=mpif90
# fortran linker
FCL=$(FC) -mkl
#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
# CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
# CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
# SUSE X.X, maybe some Red Hat distributions:
CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)
# this release should be fpp clean
# we now recommend fpp as preprocessor
# if this fails go back to cpp
CPP_=fpp -f_com=no -free -w0 $*.F $*$(SUFFIX)
#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf charge density reduced in X direction
# wNGXhalf gamma point only reduced in X direction
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko
#-----------------------------------------------------------------------
CPP = $(CPP_) -DHOST=\"LinuxIFC\" \
-DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \
# -DRPROMU_DGEMV -DRACCMU_DGEMV
#-----------------------------------------------------------------------
# general fortran flags (there must a trailing blank on this line)
# byterecl is strictly required for ifc, since otherwise
# the WAVECAR file becomes huge
#-----------------------------------------------------------------------
FFLAGS = -FR -names lowercase -assume byterecl -free
#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK SSE1 optimization, but also generate code executable on all mach.
# xK improves performance somewhat on XP, and a is required in order
# to run the code on older Athlons as well
# -xW SSE2 optimization
# -axW SSE2 optimization, but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------
# ifc.9.1, ifc.10.1 recommended
OFLAG=-O2 -ip
OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG = -FR -O0
INLINE = $(OFLAG)
#-----------------------------------------------------------------------
# the following lines specify the position of BLAS and LAPACK
# we recommend to use mkl, that is simple and most likely
# fastest in Intel based machines
#-----------------------------------------------------------------------
# mkl path for ifc 11 compiler
#MKL_PATH=$(MKLROOT)/lib/em64t
# mkl path for ifc 12 compiler
MKL_PATH=$(MKLROOT)/lib/intel64
MKL_FFTW_PATH=$(MKLROOT)/interfaces/fftw3xf/
# BLAS
# setting -DRPROMU_DGEMV -DRACCMU_DGEMV in the CPP lines usually speeds up program ex
ecution
BLAS= -Wl,--start-group $(MKL_PATH)/libmkl_intel_lp64.a $(MKL_PATH)/libmkl_intel_thre
ad.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -lguide
# faster linking and available from at least version 11
#BLAS= -lguide -mkl
# LAPACK, use vasp.5.lib/lapack_double
#LAPACK= ../vasp.5.lib/lapack_double.o
# LAPACK from mkl, usually faster and contains scaLAPACK as well
LAPACK= $(MKL_PATH)/libmkl_intel_lp64.a
# here a tricky version, link in libgoto and use mkl as a backup
# also needs a special line for LAPACK
# this is the best thing you can do on AMD based systems !!!!!!
#BLAS = -Wl,--start-group /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_threa
d.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -liomp5
#LAPACK= /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_lp64.a
#-----------------------------------------------------------------------
LIB = -L../vasp.5.lib -ldmy \
../vasp.5.lib/linpack_double.o $(LAPACK) \
$(BLAS)
# options for linking, nothing is required (usually)
LINK =
#-----------------------------------------------------------------------
# fft libraries:
# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------
#FFT3D = fft3dfurth.o fft3dlib.o
FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o $(MKLROOT)/interfaces/fftw3xf
/libfftw3xf_intel.a
# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a
# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D = fftw3d.o fft3dlib.o $(MKL_FFTW_PATH)/libfftw3xf_intel.a
INCS = -I$(MKLROOT)/include/fftw
#=======================================================================
# MPI section, uncomment the following lines until
# general rules and compile lines
# presently we recommend OPENMPI, since it seems to offer better
# performance than lam or mpich
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi
#-----------------------------------------------------------------------
#FC=mpif90
#FCL=$(FC)
#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf charge density reduced in Z direction
# wNGZhalf gamma point only reduced in Z direction
# scaLAPACK use scaLAPACK (recommended if mkl is available)
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
#CPP = $(CPP_) -DMPI -DHOST=\"LinuxIFC\" -DIFC \
# -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \
# -DMPI_BLOCK=8000 -Duse_collective -DscaLAPACK
## -DRPROMU_DGEMV -DRACCMU_DGEMV
#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply leave this section commented out
#-----------------------------------------------------------------------
# usually simplest link in mkl scaLAPACK
#BLACS= -lmkl_blacs_openmpi_lp64
#SCA= $(MKL_PATH)/libmkl_scalapack_lp64.a $(BLACS)
#-----------------------------------------------------------------------
# libraries
#-----------------------------------------------------------------------
#LIB = -L../vasp.5.lib -ldmy \
# ../vasp.5.lib/linpack_double.o \
# $(SCA) $(LAPACK) $(BLAS)
#-----------------------------------------------------------------------
# parallel FFT
#-----------------------------------------------------------------------
# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
#FFT3D = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o
# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfft
w3.a
# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o $(MKL_FFTW_PATH)/libfftw3xf_
intel.a
#INCS = -I$(MKLROOT)/include/fftw
#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC= symmetry.o symlib.o lattlib.o random.o
SOURCE= base.o mpi.o smart_allocate.o xml.o \
constant.o jacobi.o main_mpi.o scala.o \
asa.o lattice.o poscar.o ini.o mgrid.o xclib.o vdw_nl.o xclib_gra
d.o \
radial.o pseudo.o gridq.o ebs.o \
mkpoints.o wave.o wave_mpi.o wave_high.o spinsym.o \
$(BASIC) nonl.o nonlr.o nonl_high.o dfast.o choleski2.o \
mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o \
constrmag.o cl_shift.o relativistic.o LDApU.o \
paw_base.o metagga.o egrad.o pawsym.o pawfock.o pawlhf.o rhfatm.o h
yperfine.o paw.o \
mkpoints_full.o charge.o Lebedev-Laikov.o stockholder.o dipol.o p
ot.o \
dos.o elf.o tet.o tetweight.o hamil_rot.o \
chain.o dyna.o k-proj.o sphpro.o us.o core_rel.o \
aedens.o wavpre.o wavpre_noio.o broyden.o \
dynbr.o hamil_high.o rmm-diis.o reader.o writer.o tutor.o xml_writer.
o \
brent.o stufak.o fileio.o opergrid.o stepver.o \
chgloc.o fast_aug.o fock_multipole.o fock.o mkpoints_change.o sym_grad.o
\
mymath.o internals.o npt_dynamics.o dynconstr.o dimer_heyden.o dvvtraject
ory.o subdftd3.o \
vdwforcefield.o nmr.o pead.o subrot.o subrot_scf.o paircorrection
.o \
force.o pwlhf.o gw_model.o optreal.o steep.o davidson.o david_inne
r.o \
electron.o rot.o electron_all.o shm.o pardens.o \
optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o \
hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o \
lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o \
linear_optics.o \
setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \
gauss_quad.o m_unirnk.o minimax_tabs.o minimax.o \
mlwf.o ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o \
local_field.o ump2.o ump2kpar.o fcidump.o ump2no.o \
bse_te.o bse.o acfdt.o chi.o sydmat.o \
lcao_bare.o wnpr.o dmft.o \
rmm-diis_mlr.o linear_response_NMR.o wannier_interpol.o linear_response.o a
uger.o getshmem.o \
dmatrix.o
vasp: $(SOURCE) $(FFT3D) $(INC) main.o
rm -f vasp
$(FCL) -o vasp main.o $(SOURCE) $(FFT3D) $(LIB) $(LINK)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
$(FCL) -o makeparam $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
$(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
$(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
$(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o ba
se.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
$(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)
clean:
-rm -f *.g *.f *.o *.L *.mod ; touch *.F
main.o: main$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcspin$(SUFFIX)
makeparam.o: makeparam$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c makeparam$(SUFFIX)
makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F
$(OBJ_HIGH):
$(CPP)
$(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
$(CPP)
$(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)
fft3dlib_f77.o: fft3dlib_f77.F
$(CPP)
$(F77) $(FFLAGS_F77) -c $*$(SUFFIX)
.F.o:
$(CPP)
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
$(CPP)
$(SUFFIX).o:
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
# special rules
#-----------------------------------------------------------------------
# these special rules have been tested for ifc.11 and ifc.12 only
fft3dlib.o : fft3dlib.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
fft3dfurth.o : fft3dfurth.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
fftw3d.o : fftw3d.F
$(CPP)
$(FC) -FR -lowercase -O1 $(INCS) -c $*$(SUFFIX)
fftmpi.o : fftmpi.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
fftmpiw.o : fftmpiw.F
$(CPP)
$(FC) -FR -lowercase -O1 $(INCS) -c $*$(SUFFIX)
wave_high.o : wave_high.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
# the following rules are probably no longer required (-O3 seems to work)
wave.o : wave.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
paw.o : paw.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
cl_shift.o : cl_shift.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
us.o : us.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
LDApU.o : LDApU.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX
Intel Fortran Compiler 14.4 and MKL libraries with OPENMPI
Linux version is Fedora 20
I get this error :
fpp -f_com=no -free -w0 fftmpiw.F fftmpiw.f90 -DHOST=\"LinuxIFC\" -DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf
mpif90 -FR -lowercase -O1 -I/opt/intel/composer_xe_2013_sp1.1.106/mkl/include/fftw -c fftmpiw.f90
ifort: command line remark #10010: option '-lowercase' is deprecated and will be removed in a future release. See '-help deprecated'
fftmpiw.F(439): error #6460: This is not a field name that is defined in the encompassing structure. [NODE_ME]
IF (GRID%COMM%NODE_ME==1) THEN
-----------------------------^
compilation aborted for fftmpiw.f90 (code 1)
make: *** [fftmpiw.o] Error 1
I am using this makefile :
.SUFFIXES: .inc .f .f90 .F
#-----------------------------------------------------------------------
# Makefile for Intel Fortran compiler for Pentium/Athlon/Opteron
# based systems
# we recommend this makefile for both Intel as well as AMD systems
# for AMD based systems appropriate BLAS (libgoto) and fftw libraries are
# however mandatory (whereas they are optional for Intel platforms)
# For Athlon we recommend
# ) to link against libgoto (and mkl as a backup for missing routines)
# ) odd enough link in libfftw3xf_intel.a (fftw interface for mkl)
# feedback is greatly appreciated
#
# The makefile was tested only under Linux on Intel and AMD platforms
# the following compiler versions have been tested:
# - ifc.7.1 works stable somewhat slow but reliably
# - ifc.8.1 fails to compile the code properly
# - ifc.9.1 recommended (both for 32 and 64 bit)
# - ifc.10.1 partially recommended (both for 32 and 64 bit)
# tested build 20080312 Package ID: l_fc_p_10.1.015
# the gamma only mpi version can not be compiles
# using ifc.10.1
# - ifc.11.1 partially recommended (some problems with Gamma only and intel fftw)
# Build 20090630 Package ID: l_cprof_p_11.1.046
# - ifort.12.1 strongly recommended (we use this to compile vasp)
# Version 12.1.5.339 Build 20120612
#
# it might be required to change some of library path ways, since
# LINUX installations vary a lot
#
# Hence check ***ALL*** options in this makefile very carefully
#-----------------------------------------------------------------------
#
# BLAS must be installed on the machine
# there are several options:
# 1) very slow but works:
# retrieve the lapackage from ftp.netlib.org
# and compile the blas routines (BLAS/SRC directory)
# please use g77 or f77 for the compilation. When I tried to
# use pgf77 or pgf90 for BLAS, VASP hang up when calling
# ZHEEV (however this was with lapack 1.1 now I use lapack 2.0)
# 2) more desirable: get an optimized BLAS
#
# the two most reliable packages around are presently:
# 2a) Intels own optimised BLAS (PIII, P4, PD, PC2, Itanium)
# http://developer.intel.com/software/products/mkl/
# this is really excellent, if you use Intel CPU's
#
# 2b) probably fastest SSE2 (4 GFlops on P4, 2.53 GHz, 16 GFlops PD,
# around 30 GFlops on Quad core)
# Kazushige Goto's BLAS
# http://www.cs.utexas.edu/users/kgoto/signup_first.html
# http://www.tacc.utexas.edu/resources/software/
#
#-----------------------------------------------------------------------
# all CPP processed fortran files have the extension .f90
SUFFIX=.f90
#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=mpif90
# fortran linker
FCL=$(FC) -mkl
#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
# CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
# CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
# SUSE X.X, maybe some Red Hat distributions:
CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)
# this release should be fpp clean
# we now recommend fpp as preprocessor
# if this fails go back to cpp
CPP_=fpp -f_com=no -free -w0 $*.F $*$(SUFFIX)
#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf charge density reduced in X direction
# wNGXhalf gamma point only reduced in X direction
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko
#-----------------------------------------------------------------------
CPP = $(CPP_) -DHOST=\"LinuxIFC\" \
-DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \
# -DRPROMU_DGEMV -DRACCMU_DGEMV
#-----------------------------------------------------------------------
# general fortran flags (there must a trailing blank on this line)
# byterecl is strictly required for ifc, since otherwise
# the WAVECAR file becomes huge
#-----------------------------------------------------------------------
FFLAGS = -FR -names lowercase -assume byterecl -free
#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK SSE1 optimization, but also generate code executable on all mach.
# xK improves performance somewhat on XP, and a is required in order
# to run the code on older Athlons as well
# -xW SSE2 optimization
# -axW SSE2 optimization, but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------
# ifc.9.1, ifc.10.1 recommended
OFLAG=-O2 -ip
OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG = -FR -O0
INLINE = $(OFLAG)
#-----------------------------------------------------------------------
# the following lines specify the position of BLAS and LAPACK
# we recommend to use mkl, that is simple and most likely
# fastest in Intel based machines
#-----------------------------------------------------------------------
# mkl path for ifc 11 compiler
#MKL_PATH=$(MKLROOT)/lib/em64t
# mkl path for ifc 12 compiler
MKL_PATH=$(MKLROOT)/lib/intel64
MKL_FFTW_PATH=$(MKLROOT)/interfaces/fftw3xf/
# BLAS
# setting -DRPROMU_DGEMV -DRACCMU_DGEMV in the CPP lines usually speeds up program ex
ecution
BLAS= -Wl,--start-group $(MKL_PATH)/libmkl_intel_lp64.a $(MKL_PATH)/libmkl_intel_thre
ad.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -lguide
# faster linking and available from at least version 11
#BLAS= -lguide -mkl
# LAPACK, use vasp.5.lib/lapack_double
#LAPACK= ../vasp.5.lib/lapack_double.o
# LAPACK from mkl, usually faster and contains scaLAPACK as well
LAPACK= $(MKL_PATH)/libmkl_intel_lp64.a
# here a tricky version, link in libgoto and use mkl as a backup
# also needs a special line for LAPACK
# this is the best thing you can do on AMD based systems !!!!!!
#BLAS = -Wl,--start-group /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_threa
d.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -liomp5
#LAPACK= /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_lp64.a
#-----------------------------------------------------------------------
LIB = -L../vasp.5.lib -ldmy \
../vasp.5.lib/linpack_double.o $(LAPACK) \
$(BLAS)
# options for linking, nothing is required (usually)
LINK =
#-----------------------------------------------------------------------
# fft libraries:
# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------
#FFT3D = fft3dfurth.o fft3dlib.o
FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o $(MKLROOT)/interfaces/fftw3xf
/libfftw3xf_intel.a
# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a
# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D = fftw3d.o fft3dlib.o $(MKL_FFTW_PATH)/libfftw3xf_intel.a
INCS = -I$(MKLROOT)/include/fftw
#=======================================================================
# MPI section, uncomment the following lines until
# general rules and compile lines
# presently we recommend OPENMPI, since it seems to offer better
# performance than lam or mpich
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi
#-----------------------------------------------------------------------
#FC=mpif90
#FCL=$(FC)
#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf charge density reduced in Z direction
# wNGZhalf gamma point only reduced in Z direction
# scaLAPACK use scaLAPACK (recommended if mkl is available)
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko
#-----------------------------------------------------------------------
#-----------------------------------------------------------------------
#CPP = $(CPP_) -DMPI -DHOST=\"LinuxIFC\" -DIFC \
# -DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \
# -DMPI_BLOCK=8000 -Duse_collective -DscaLAPACK
## -DRPROMU_DGEMV -DRACCMU_DGEMV
#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply leave this section commented out
#-----------------------------------------------------------------------
# usually simplest link in mkl scaLAPACK
#BLACS= -lmkl_blacs_openmpi_lp64
#SCA= $(MKL_PATH)/libmkl_scalapack_lp64.a $(BLACS)
#-----------------------------------------------------------------------
# libraries
#-----------------------------------------------------------------------
#LIB = -L../vasp.5.lib -ldmy \
# ../vasp.5.lib/linpack_double.o \
# $(SCA) $(LAPACK) $(BLAS)
#-----------------------------------------------------------------------
# parallel FFT
#-----------------------------------------------------------------------
# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
#FFT3D = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o
# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfft
w3.a
# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o $(MKL_FFTW_PATH)/libfftw3xf_
intel.a
#INCS = -I$(MKLROOT)/include/fftw
#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------
BASIC= symmetry.o symlib.o lattlib.o random.o
SOURCE= base.o mpi.o smart_allocate.o xml.o \
constant.o jacobi.o main_mpi.o scala.o \
asa.o lattice.o poscar.o ini.o mgrid.o xclib.o vdw_nl.o xclib_gra
d.o \
radial.o pseudo.o gridq.o ebs.o \
mkpoints.o wave.o wave_mpi.o wave_high.o spinsym.o \
$(BASIC) nonl.o nonlr.o nonl_high.o dfast.o choleski2.o \
mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o \
constrmag.o cl_shift.o relativistic.o LDApU.o \
paw_base.o metagga.o egrad.o pawsym.o pawfock.o pawlhf.o rhfatm.o h
yperfine.o paw.o \
mkpoints_full.o charge.o Lebedev-Laikov.o stockholder.o dipol.o p
ot.o \
dos.o elf.o tet.o tetweight.o hamil_rot.o \
chain.o dyna.o k-proj.o sphpro.o us.o core_rel.o \
aedens.o wavpre.o wavpre_noio.o broyden.o \
dynbr.o hamil_high.o rmm-diis.o reader.o writer.o tutor.o xml_writer.
o \
brent.o stufak.o fileio.o opergrid.o stepver.o \
chgloc.o fast_aug.o fock_multipole.o fock.o mkpoints_change.o sym_grad.o
\
mymath.o internals.o npt_dynamics.o dynconstr.o dimer_heyden.o dvvtraject
ory.o subdftd3.o \
vdwforcefield.o nmr.o pead.o subrot.o subrot_scf.o paircorrection
.o \
force.o pwlhf.o gw_model.o optreal.o steep.o davidson.o david_inne
r.o \
electron.o rot.o electron_all.o shm.o pardens.o \
optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o \
hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o \
lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o \
linear_optics.o \
setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o \
gauss_quad.o m_unirnk.o minimax_tabs.o minimax.o \
mlwf.o ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o \
local_field.o ump2.o ump2kpar.o fcidump.o ump2no.o \
bse_te.o bse.o acfdt.o chi.o sydmat.o \
lcao_bare.o wnpr.o dmft.o \
rmm-diis_mlr.o linear_response_NMR.o wannier_interpol.o linear_response.o a
uger.o getshmem.o \
dmatrix.o
vasp: $(SOURCE) $(FFT3D) $(INC) main.o
rm -f vasp
$(FCL) -o vasp main.o $(SOURCE) $(FFT3D) $(LIB) $(LINK)
makeparam: $(SOURCE) $(FFT3D) makeparam.o main.F $(INC)
$(FCL) -o makeparam $(LINK) makeparam.o $(SOURCE) $(FFT3D) $(LIB)
zgemmtest: zgemmtest.o base.o random.o $(INC)
$(FCL) -o zgemmtest $(LINK) zgemmtest.o random.o base.o $(LIB)
dgemmtest: dgemmtest.o base.o random.o $(INC)
$(FCL) -o dgemmtest $(LINK) dgemmtest.o random.o base.o $(LIB)
ffttest: base.o smart_allocate.o mpi.o mgrid.o random.o ffttest.o $(FFT3D) $(INC)
$(FCL) -o ffttest $(LINK) ffttest.o mpi.o mgrid.o random.o smart_allocate.o ba
se.o $(FFT3D) $(LIB)
kpoints: $(SOURCE) $(FFT3D) makekpoints.o main.F $(INC)
$(FCL) -o kpoints $(LINK) makekpoints.o $(SOURCE) $(FFT3D) $(LIB)
clean:
-rm -f *.g *.f *.o *.L *.mod ; touch *.F
main.o: main$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c main$(SUFFIX)
xcgrad.o: xcgrad$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcgrad$(SUFFIX)
xcspin.o: xcspin$(SUFFIX)
$(FC) $(FFLAGS) $(INLINE) $(INCS) -c xcspin$(SUFFIX)
makeparam.o: makeparam$(SUFFIX)
$(FC) $(FFLAGS)$(DEBUG) $(INCS) -c makeparam$(SUFFIX)
makeparam$(SUFFIX): makeparam.F main.F
#
# MIND: I do not have a full dependency list for the include
# and MODULES: here are only the minimal basic dependencies
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
# if one strucuture is changed then touch_dep must be called
# with the corresponding name of the structure
#
base.o: base.inc base.F
mgrid.o: mgrid.inc mgrid.F
constant.o: constant.inc constant.F
lattice.o: lattice.inc lattice.F
setex.o: setexm.inc setex.F
pseudo.o: pseudo.inc pseudo.F
mkpoints.o: mkpoints.inc mkpoints.F
wave.o: wave.F
nonl.o: nonl.inc nonl.F
nonlr.o: nonlr.inc nonlr.F
$(OBJ_HIGH):
$(CPP)
$(FC) $(FFLAGS) $(OFLAG_HIGH) $(INCS) -c $*$(SUFFIX)
$(OBJ_NOOPT):
$(CPP)
$(FC) $(FFLAGS) $(INCS) -c $*$(SUFFIX)
fft3dlib_f77.o: fft3dlib_f77.F
$(CPP)
$(F77) $(FFLAGS_F77) -c $*$(SUFFIX)
.F.o:
$(CPP)
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
.F$(SUFFIX):
$(CPP)
$(SUFFIX).o:
$(FC) $(FFLAGS) $(OFLAG) $(INCS) -c $*$(SUFFIX)
# special rules
#-----------------------------------------------------------------------
# these special rules have been tested for ifc.11 and ifc.12 only
fft3dlib.o : fft3dlib.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
fft3dfurth.o : fft3dfurth.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
fftw3d.o : fftw3d.F
$(CPP)
$(FC) -FR -lowercase -O1 $(INCS) -c $*$(SUFFIX)
fftmpi.o : fftmpi.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
fftmpiw.o : fftmpiw.F
$(CPP)
$(FC) -FR -lowercase -O1 $(INCS) -c $*$(SUFFIX)
wave_high.o : wave_high.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
# the following rules are probably no longer required (-O3 seems to work)
wave.o : wave.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
paw.o : paw.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
cl_shift.o : cl_shift.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX)
us.o : us.F
$(CPP)
$(FC) -FR -lowercase -O1 -c $*$(SUFFIX)
LDApU.o : LDApU.F
$(CPP)
$(FC) -FR -lowercase -O2 -c $*$(SUFFIX